Konica Minolta (FX-3) manual To change/delete a programmed group of fax numbers

6.1 Setting Up the Fax Registration 6

❍With group dialing, a one-touch dial key programmed with a group can be specified. In that case, the number of fax numbers programmed in the specified one-touch dial key (group dial key) is added.

7When you are finished specifying

recipients, press the [Start] key.

The settings are registered.

To program another group, repeat steps 3 through 7.

8Press the [No] key to finish

programming.

The “FAX REGISTRATION” menu appears again.

To change/delete a programmed group of fax numbers

1Select the “FAX REGISTRATION”.

❍ Refer to “Selecting the “FAX REGISTRATION” menu” on page 6-3.

2Press the [3] key from the 10-Key

Pad to select “GROUP DIAL”.

3Press the one-touch dial key that

you wish to change or delete.

4Press the [No] key.

5 Using the [	Ö	] and [Ö] keys, select
either “EDIT” or “DELETE”, and
then press the [Yes] key.

❍ If “EDIT” was selected, the group name is displayed. (Continue with step 6.)

Using the Utility Mode (Fax) Chapter 6

Fax Kit (FX-3) 6-13