Konica Minolta (FX-3) manual Ö keys, select

6.1 Setting Up the Fax Registration 6

2Press the [4] key from the 10-Key

Pad to select “PROGRAM DIAL”.

3Press the one-touch dial key ([24]

through [27]) programmed with the mailbox transmission that you wish to change or delete.

4Press the [No] key.

5 Using the [ Ö ] and [Ö] keys, select

either “EDIT” or “DELETE”, and then press the [Yes] key.

❍If “EDIT” was selected, the specified recipient is displayed. (Continue with step 6.)

❍If “DELETE” was selected, the program dialing settings are deleted and the “SELECT REGIST.KEY” screen appears again.

6 To change the recipient, press the [No] key, and then by using the one-touch dial keys or the speed dial numbers, or by entering the fax number using the 10-Key Pad, specify a different recipient.

7 Press the [Yes] key.

The mailbox ID is displayed.

8 To change the mailbox ID, press the [No] key, and then use the 10- Key Pad to enter the new ID.

9 Press the [Yes] key.

The password is displayed.

Using the Utility Mode (Fax) Chapter 6

Fax Kit (FX-3) 6-19