Konica Minolta (FX-3) manual ? Has the wrong fax number been specified?

Fax Transmission/Reception Methods Chapter 4

4 4.1 Transmission Methods

5Specify the fax number of the recipient.

Repeat the appropriate operations described below until all recipients have been specified.

❍ When using the one-touch dial

keys:

Press the one-touch dial key programmed with the desired fax number.

Press the [Yes] key, and then specify the next recipient.

❍When using the speed dial numbers:

Press the [Speed Dial] key, and then use the 10-Key Pad to enter the 3-digit speed dial number programmed with the desired fax number.

Press the [Yes] key, and then specify the next recipient.

❍When using group dialing:

Press the one-touch dial key programmed with the desired group of fax numbers.

Press the [Yes] key, and then specify the next recipient.

❍When selecting from the phone book:

Press the [Phone Book] key, and then select either “LIST” or “SEARCH” to select the desired fax number. (Refer to “To fax using the phone book” on page 3-8.)

Press the [Yes] key, and then specify the next recipient.

❍When entering the number using the 10-Key Pad:

Enter the fax number of the recipient.

Press the [Yes] key, and then specify the next recipient.

?Has the wrong fax number been specified?

➜Press the [No] key to delete the current selection. (This is valid only before the recipient is set by pressing the [Yes] key.)

6Press the [Start] key.

A message appears, allowing you to select whether or not to check the recipients.

4-8 Fax Kit (FX-3)