Konica Minolta (FX-3) manual Specifying the Setting for Memory RX Mode

Using the Utility Mode (Fax) Chapter 6

6 6.3 Setting Up the Reception

Specifying the Setting for “MEMORY RX MODE”

1Select the “RX OPERATION”.

❍ Refer to “Selecting the “RX OPERATION” menu” on page 6-35.

2Press the [1] key from the 10-Key Pad to select “MEMORY RX MODE”.

3 Using the [ Ö ] and [Ö] keys, select

“ON”, and then press the [Yes] key.

4Using the 10-Key Pad, enter the time for memory reception to

begin, and then press the [Yes]

key.

❍To specify that memory

reception stays on from the time that it is set to “ON” until it is manually canceled, press the [Yes] key without entering a start time. (Skip to step 6.)

5Using the 10-Key Pad, enter the time for memory reception to end, and then press the [Yes] key.

6Using the 10-Key Pad, enter the 4- digit password used to cancel

memory reception, and then press

the [Yes] key.

❍If no password is to be

specified, press the [Yes] key without entering anything.

The “RX OPERATION” menu appears again.

6-36 Fax Kit (FX-3)