Konica Minolta (FX-3) manual To fax using program dialing

3.1 Dialing 3

To fax using program dialing

If one-touch dial keys have already been programmed with fax numbers and a transmission/reception function (such as timer transmission or polling reception), that function can be carried out by pressing just the corresponding one-touch dial key.

For details on setting program dialing, refer to “Specifying the Setting for “PROGRAM DIAL”” on page 6-15.

1Press the [Fax] key to enter Fax mode.

2Load the document into the Automatic Document Feeder.

❍For details on placing the document on the Original Glass, refer to “To fax documents positioned on the Original Glass” on page 3-13.

❍This step is not necessary with polling reception.

3If necessary, change the “Resolution” setting (p. 3-11).

❍This step is not necessary with polling reception.

4Press the one-touch dial key ([24]

through [27]) programmed with the desired function.

Faxing Chapter 3

5Press the [Start] key.

The programmed function automatically begins.

Tip

If the wrong one-touch dial key has been pressed, press the [Stop] key, and then press the [Yes] in the next screen that appears.

To cancel a timer transmission, select “CANCEL RESERV.” from the “FUNCTION” menu (p. 4-20).

Fax Kit (FX-3) 3-7