Konica Minolta (FX-3) manual Specifying the Setting for NO.of Rings

Chapter 6

6 6.3 Setting Up the Reception

Specifying the Setting for “NO.of RINGS”

1Select the “RX OPERATION”.

❍ Refer to “Selecting the “RX OPERATION” menu” on page 6-35.

2Press the [2] key from the 10-Key

Pad to select “NO.of RINGS”.

3Using the 10-Key Pad, enter the desired number of rings, and then

press the [Yes] key.

❍The number of rings can be set between 1 and 16.

The “RX OPERATION” menu appears again.

Specifying the Setting for “REDUCTION RX”

1Select the “RX OPERATION”.

❍ Refer to “Selecting the “RX OPERATION” menu” on page 6-35.

2Press the [3] key from the 10-Key

Pad to select “REDUCTION RX”.

Using the Utility Mode (Fax)

3 Using the [	Ö	] and [Ö] keys, select
“ON” (print the document
reduced), “OFF” (split the printout)
or “CUT” (discard any excess),
and then press the [Yes] key.
The “RX OPERATION” menu appears again.

6-38 Fax Kit (FX-3)