Konica Minolta (FX-3) manual Specifying the Setting for Scan Contrast

Chapter 6

6 6.2 Setting Up the Transmission

Specifying the Setting for “SCAN CONTRAST”

1Select the “TX OPERATION”.

❍ Refer to “Selecting the “TX OPERATION” menu” on page 6-31.

2Press the [1] key from the 10-Key Pad to select “SCAN CONTRAST”.

3	Using the [	Ö	] and [Ö] keys, select
	one of the five settings between
	“LIGHT” and “DARK”, and then
	press the [Yes] key.
	The “TX OPERATION” menu
	appears again.
Specifying the Setting for “RESOLUTION”
1	Select the “TX OPERATION”.
	❍ Refer to “Selecting the “TX OPERATION” menu” on page 6-31.
2	Press the [2] key from the 10-Key
	Pad to select “RESOLUTION”.

Using the Utility Mode (Fax)

3 Using the [	Ö	] and [Ö] keys, select
the desired resolution setting, and
then press the [Yes] key.
❍ The resolution settings appear
as follows.
STD: Standard

FINE: Fine

S/F: Super Fine

H/T: Half Tone

If “H/T” was selected, a screen appears, allowing you to make a detailed setting. (Continue with step 4.) If any setting other than “H/T” was selected, the “TX OPERATION” menu appears again.

6-32 Fax Kit (FX-3)