Konica Minolta (FX-3) manual Specifying the Setting for Line Monitor

Using the Utility Mode (Fax) Chapter 6

6				6.4 Settings Up the Communication
	3 Using the [	Ö	] and [Ö] keys, select
	either “TONE” (for tone dialing) or
	“PULSE” (for pulse dialing), and
	then press the [Yes] key.

4If “PULSE” was selected, select either “10pps” or “20pps”, and then press the [Yes] key.

The “COMM.SETTING” menu appears again.

Specifying the Setting for “LINE MONITOR”

1Press the [Utility] key nine times. “COMM. SETTING” appears.

2Press the [2] key from the 10-Key Pad to select “LINE MONITOR”.

3 Using the [	Ö	] and [Ö] keys, select
“HIGH”, “LOW” or “OFF”, and then
press the [Yes] key.

The “COMM.SETTING” menu appears again.

6-44 Fax Kit (FX-3)