Coleman 5110, 5100 LP manual 16-A, 16-B

Step

16

ÖAssemble the Electrode Wires and the Battery to the

Electrode Module. Note: The fuel hoses are not

shown in this step, for simplicity.

16-A		16-A. Slip the Top Burner Wires through the
		Top Burner Wires	large hole in the Top Panel.
			Slip the Side Burner Wire through the
		Ö
			large hole in the Left Panel.
9-Volt Battery		Ö	Assemble the 9-Volt Battery to the
			Electrode Module.
		Note: The polarity is marked on the Electrode
		Electrode Module	Module.
Side Burner Wire
	16-B	Electrode Module

	9-Volt Battery
		Igniter Button Wires
TEST THE IGNITER:		(Note: Large Tabs)
A SPARK SHOULD APPEAR AT
ELECTRODE TIP.
IF THE SPARK DOES NOT
APPEAR:

-CHECK THE WIRE

CONNECTIONS TO THE

MODULE.

-CHECK PROPER

ASSEMBLY OF FRESH

9-VOLT BATTERY.

Side Burner

Electrode Wire

21