General Safety Information cont.
1 |
2 | 3 |
4 |
|
| 24" |
5 | 6 |
7 |
8 |
General Installation
•Installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1 (USA),
To check local codes, see your local L.P. gas dealer or natural gas company listed in the Yellow Pages for recommended installation pro- cedures and regulations.
WARNING
This appliance is not to be installed in or on a recreational vehicle and/or boat.
Follow these safety rules before each use:
1.Always maintain a minimum clearance of 36 inches or 90 cm from all sides of grill to any combustible construction. (Fig. 9)
2.Never locate grill under an unprotected combustible material or overhang which is connected to a building. (Fig. 9a)
3.Do not obstruct the flow of combustion and ventilation air.
4.Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris.
5.Grill should be level and not facing directly into wind.
WARNING
Keep any electrical supply cord away from any heated surface. During assembly of grill and when attaching or replacing the L.P. gas cylinder, insure that the gas supply hose is free of kinks and is at least 3" away from hot surfaces such as the grill housing.
9 |
|
Clear |
|
| 36" |
36" | (90cm) |
| |
(90cm) |
|
| 36" |
| (90cm) |
36" | REPRESENTATIVE |
(90cm) | ILLUSTRATION |
9a |
|
3