Before Assembly
Open shipping box by slicing down its edges with a box cutter. Remove all packed grill parts and packing materials from the styrofoam support pieces. Obtain the aid of an assistant to remove the grill head from the support pieces. Place the grill head on its side; do not place it on its bottom or the grease tray could become bent. Remove the rest of the grill parts from the styrofoam support pieces, then place the grill head onto the support pieces as shown in the picture to the right. Carefully open the grill head and remove the contents packed in it.
PLEASE READ AND FOLLOW THE INSTRUCTIONS CAREFULLY STEP BY STEP
Tools Required:
•Adjustable wrench (not provided)
•Screwdriver (not provided)
•7/16"Combination wrench (not provided)
•The following hardware is provided in blister pack:
Item | Description | Figure | Quantity | |||
| M4X10 | screw |
| 24 pcs | ||
2 | M5X10 | screw |
| 4 | pcs | |
3 | M6X13 | screw | /J |
|
| |
| 16 pcs | |||||
|
|
|
| "_\\ |
|
|
4 | M6 | compression washer |
| 8 | pcs | |
5 | M6 | flat washer |
| 8 | pcs | |
6 | M5 | flat washer |
| 4 | pcs | |
7 | M6 | lock washer |
| 8 | pcs | |
8 | M5 | lock washer |
| 4 | pcs | |