Sideburner
[] | Loosenside burnerin side shelf. To loosen,unscrewand removetwo front screwsandwashers holding |
| sideburnerin place. Note: Do not loosenelectrodescrew. |
[] | Removeknob and bezelfrom sideburnercontrolvalve. To remove,pull knob straightout from valve stem. |
| Unscrewbezel fromvalve face andset the twoscrews aside. |
[] | Insert valve stem through hole in fascia. Attach bezel to fascia and valve face with previously |
| removed 2 screws. |
[] | Place sideburner tube over the valve, making sure that valve is inside sideburner tube as shown. |
[] | Reattach sideburner to sideburner shelf with the 2 previously removed screws and washers. |
[] | Push control knob onto sideburner valve stem. |
[] | Replace sideburnergrate. |
[] | Connect both igniter wires to the igniter module on the inside of the right fascia. To connect, push |
| igniter wire tips onto pins in igniter module. |
[] | Unscrew igniter cap from control panel. Insert (1) AA battery (not provided) into battery slot with |
| positive end (+) facing outward. Screw igniter cap back onto panel. |