install Side Burner Frame to Firebox.
[] Unscrew the 2 Phillips Head bolts ¼" from the upper left and right corner holes in the left side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side burner frame.
[] Slide the upper holes of the side burner frame over the heads of the 2 Phillips Head Bolts and drop down.
[] Use 2 Phillips Head Bolts (M6x16mm) and 2 Lock Washers (M6) to attach the lower holes in the side burner frame to the firebox as shown in Inset 2. Tighten the upper bolts after the 2 lower bolts are tight.
Inset 1
Phillips Head Bolt M6x16mm
Qty: 2
Inset 2
©
Lock Washer M6 qty: 2
Install | Side Burner | Valve |
| wire from the regulator hose | if they are | taped | together. |
| ||||||
[] | Detach | side burner ignition |
| |||||||||||
[] | Insert | the | side | burner | valve | stem | up through | the hole in the Side Burner | Control Panel. | See | ||||
| Inset | 1. |
|
|
|
|
|
|
|
|
|
|
|
|
[] | Center | the | side | burner | valve | in the | side burner | tube. | See | Inset | 2. |
|
|
|
[] | Secure | the | side | burner | valve stem to the Side | Burner | Control | Panel | using | 2 Phillips Head | Bolts | |||
| (M4x8mm). | See Inset | 3. |
|
|
|
|
|
|
|
|
| ||
nset 3
Phillips Head Bolt M4x8mm
Qty: 2
Inset 2
Inset 1
14