Electrolux 51" Stainless Steel Gas Grill manual Side Burner Assembly, Side Burner Parts Assembly

Side Burner Assembly 6

Fig. 7)

SIDE BURNER PARTS ASSEMBLY

1.Loosen the bolts on the side of the grill and attach the side burner by allowing the bolt heads to fall through the large opening in the bottom of the keyhole slots. Then slide the side burner downward until the bolts are resting against the top of the key hole slots. Tighten all of the shelf bolts. (See Fig. 8-9)

2.Install burner and cap. (See Fig. 10-11)

3.Install grate over burner. (See Fig. 12)

4.Attach the wire coming out of the grill and the side burner wire to the igniter terminals . (See Fig. 13-14)

Note: It does not matter which wire goes to which terminal on the electronic igniter

Front of side burner.

Fig. 13

Fig. 14

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Fig. 12