3G Green Green Globe C-5050ZOOM quick start Package contents, Attaching the strap and lens cap

Page 1

DIGITAL CAMERA C-5050ZOOM

Quick start guide

We’ve included this convenient Quick start guide to show you basic functions and techniques that will help you quickly master your new camera. For more detailed descriptions of procedures, as well as for additional information on more sophisticated features not covered here, please refer to the printed “Basic Manual”, or the primary “Reference Manual” on the CD-ROM.

Package contents

Camera

Software installation guide (included in

Strap

the CD-ROM package)

Lens cap/String

CD-ROM with Windows 98 USB driver

NiMH batteries (rechargeable)/

software, Reference manual, and more.

Battery charger/instruction (Olympus

Warranty card/Registration card (not

America and Olympus Europa only)

provided in some areas)

USB cable

Safety Precautions (booklet)

AV cable

xD-Picture Card

Basic manual

xD-Picture Card instructions

;Quick start guide

Remote control (Olympus America only)

 

Remote control instruction (Olympus

 

America only)

 

 

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000 24/7 online automated help: http://support.olympusamerica.com/

Phone customer support: Tel. 1-888-553-4448 (Toll-free)

Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ET E-Mail: distec@olympus.com

Olympus software updates can be obtained at: http://olympus.com/digital/

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany Tel. 040-237730

Letters: Postfach 10 49 08, 20034 Hamburg, Germany

Printed in Japan

http://www.olympus.com/

 

1AG6P1P1441--

VT406901

1.Attaching the strap and lens cap

1Pass the lens cap string through the hole in the lens cap.

2 Fasten the strap to the strap eyelet as shown Strap eyelet in the diagram.

3 Adjust the strap to the desired length. Pull the strap through the stopper ( ) and make sure it is fastened securely.

4Attach the strap to the other eyelet in the same way.

2.Taking off the lens cap

When you want to take pictures, be sure to remove the lens cap before turning on the camera.

3. Loading the batteries

1Make sure the power switch is set to OFF.

2Slide the battery compartment lock from to .

3 Place your finger on the mark and slide the battery compartment cover in the direction of , then lift in the direction of .

• Use the ball of your finger to slide the cover. Do not use your fingernail as this could result in injury.

4Insert the batteries, making sure that they are correctly oriented as shown in the illustration.

When using AA (R6) batteries

When using CR-V3 lithium battery packs

Battery alignment

The correct way to insert the AA batteries is indicated on the bottom of the camera.

5Close the battery compartment cover,

then press it down and slide it in the direction shown .

• Press the center of the cover, as it may be difficult to close properly by pressing the edge.

• Make sure the cover is closed securely.

6Slide the battery compartment lock from to .

4. Inserting an xD-Picture Card

1Make sure the power switch is set to OFF.

2 Open the card cover.

3 Insert a card.

• Hold the card straight and insert it correctly into the xD-Picture Card/SmartMedia slot, as shown.

• An illustration showing the position for inserting the xD-Picture Card is next to the slot.

4 Close the card cover securely until it clicks.

Ejecting the card

1 Push the card all the way in to unlock it, then let it return slowly.

The card is ejected a short way and then stops. Hold the card straight and pull it out.

Note

Releasing your finger quickly after pushing the card all the way in may cause it to eject forcefully out of the slot.

• The xD-Picture Card and SmartMedia use the same slot, as do Compact Flash and Microdrive. Two cards cannot be inserted in the one slot at the same time.

Note • Never open the card cover, or remove the card or the batteries while the camera is turned on. Doing so could destroy the data stored on the card. Once destroyed, data cannot be restored.

Taking still pictures

1 Set the mode dial to

and turn the power

Mode dial

switch so that ON is aligned with the white

line.

Power switch

Viewing still pictures

1Set the mode dial to and turn the power switch so that ON is aligned with the white line.

•The monitor turns on and displays the last picture taken. (Single-frame playback)

Quick View

Pictures can be played back by pressing

twice quickly (double-click) even when the mode dial is set to a mode other

than .

Mode dial

Power switch

2Position the AF target mark in the

viewfinder on the subject.

Orange

 

lamp

Green lamp

AF target mark

3 Press the shutter button gently (halfway) to adjust the focus.

• When the focus and exposure are locked, the green lamp lights.

• If the orange lamp lights, the flash fires automatically.

4 Press the shutter button all the way (fully).

• The camera takes the picture.

• The card access lamp blinks while the picture is stored on the card.

•When the green lamp stops blinking, you can take the next picture.

To turn off the camera

2Use the arrow pad or jog dial to play back other pictures.

Arrow pad

Jumps to the picture 10 frames back.

Displays the previous

Displays the next

picture.

picture.

Jumps to the picture 10 frames ahead.

Jog dial

 

Displays the previous

Displays the next

picture.

picture.

Recording movies

1Set the mode dial to and turn the power switch so that ON is aligned with the white line.

•The monitor turns on and the available recording time on the card that you are using is displayed.

2Decide the composition while looking at the image on the monitor.

3Press the shutter button fully to start recording.

•The orange lamp on the right of the viewfinder lights.

•During movie recording, lights red.

4Press the shutter button again to stop recording.

Viewing movies

1Set the mode dial to and turn the power switch so that ON is aligned with the white line.

•The monitor turns on.

2Use the arrow pad or jog dial to display the picture with you want to play back.

3Press .

•The top menu is displayed.

4

Press

to select MOVIE PLAY.

 

 

5

Press

to select MOVIE PLAYBACK, then

MOVIE PLAY

 

press

.

 

 

 

• The movie is played back. When playback ends, the

INFO

MODE MENU

 

display automatically returns to the beginning of the

 

 

 

movie.

 

 

 

6

Press

again after playback ends to display

 

 

 

the menu.

 

 

Press to select the desired operation, then press .

PLAYBACK

:

Plays back the entire movie again.

FRAME BY FRAME :

Plays back the movie manually one frame at a time.

EXIT

:

Leaves the movie playback mode.

Protecting pictures

You are recommended to protect important pictures to avoid accidentally erasing them.

1 Use the arrow pad or jog dial to display

Protect button

the picture you want to protect.

 

 

 

 

“Viewing still pictures”

 

 

2 Press .

• The mark appears on protected pictures.

• To cancel protection, press again.

Erasing pictures (Single-frame erase)

1 Use the arrow pad or jog dial to display the picture you want to erase.

“Viewing still pictures”

 

 

 

Erase button

 

2

Press .

 

ERASE

 

• The

ERASE screen is displayed.

 

 

 

 

3

Press

to select YES, then press

.

YES

 

 

• The picture is erased and the menu is closed.

 

NO

 

 

 

 

 

 

 

SELECt

GO

Turn the power switch so that OFF is aligned with the white line.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Attaching the strap and lens cap Package contentsTaking off the lens cap Loading the batteriesButtons and dials Menu functions

C-5050ZOOM specifications

The 3G Green Green Globe C-5050ZOOM is a remarkable camera that combines advanced technology with user-friendly features, making it an ideal choice for both amateur and professional photographers. This versatile device stands out due to its impressive specifications, innovative design, and eco-friendly elements.

One of the key features of the C-5050ZOOM is its 5-megapixel resolution, which captures sharp, detailed images suitable for printing and online sharing. The camera is equipped with a powerful zoom lens that offers a focal length range equivalent to 35-105mm in 35mm film terms. This allows users to take stunning close-up shots as well as wide-angle landscapes, providing flexibility in various shooting scenarios.

In addition to its impressive optical capabilities, the C-5050ZOOM incorporates advanced digital technology. It features a high-quality image processing engine that enhances color accuracy and detail in every shot. The camera also boasts a built-in image stabilizer, which greatly reduces blurriness caused by hand tremors, ensuring that photos remain clear and crisp, even in low-light conditions.

The C-5050ZOOM emphasizes ease of use with its intuitive interface and control layout. This camera offers various shooting modes, including portrait, landscape, sports, and night shots, catering to different photography styles and environments. Its large LCD screen allows for easy framing and playback of images, while the ergonomic design ensures comfort during extended shooting sessions.

In keeping with its eco-friendly initiative, the 3G Green Green Globe C-5050ZOOM is designed to be energy-efficient. It utilizes a rechargeable lithium-ion battery that provides a long-lasting power supply, minimizing waste and reducing the need for frequent replacements. Additionally, the camera features a sustainable manufacturing process, reflecting a commitment to environmentally friendly practices.

Overall, the 3G Green Green Globe C-5050ZOOM is an exceptional camera that seamlessly blends performance, versatility, and sustainability. Its combination of high-resolution imaging, optical zoom capabilities, and user-centered design makes it a powerful tool for any photographer looking to capture life’s moments beautifully. Whether for travel, events, or everyday photography, the C-5050ZOOM stands ready to deliver stunning results.
Top Page Image Contents