STEP1
Insert 4 Caster Caps into the legs of the Cabinet and Firebox Assembly. Ensure the arrows on the top of the Caster Caps point out and away t_om the cabinet. Insert 2 Locldng Casters into 2 Caster Caps
in the t_ont legs of Cabinet and Firebox Assembly. Insert 2 Standard Casters into 2 Caster Caps in the back legs of Cabinet and Firebox Assembly.
Note: We recommend using a hammer and lightly tapping the Caster Caps and Casters into place.
I
/'
STEP 2
Place Side Burner Assembly over the top of the left legs of Cabinet and Firebox Assembly as shown.
Ensure the inside edge of the Side Burner Assembly slides down between the firebox and cabinet legs.
Also ensure the knob on the right side of the I}ont shelf of Side Burner Assembly slides into its notch on the left side of the control panel as shown in Insert 2.
Insert 1
Insert 2
Insert 2 | Insert 1 |