3D Innovations 7316-000, 7352-010 user manual HOB Model, Cooker hob on/off sensor

HOB MODEL ￿"7316-000￿"

1.Front left Hi-Light cooking zone

2.Rear central Hi-Light cooking zone

3.Front right Hi-Light cooking zone

4. Cooker hob control unit

Cooker hob controls

Cooker hob operation

Turning the cooker hob on

Turning the cooking zones on

A.Cooker hob on/off sensor

B.Heat setting or residual heat indicators C.Cooking zone on/selection sensor (+) D.Safety lock/child safety device

on/off sensor E.Sensor (-) F.Dual circuit sensor

G. Indicator signalling the additional heating circle

▪All the indicators light up (for an instant) when the cooker hob is turned on. The cooker hob is ready for use.

▪The cooker hob is equipped with electronic sensors that turn on if the relative surfaces are touched for at least 1 second.

▪A buzzer sounds every time the sensors turn on.

▪Do not place any objects on the sensor surface (error signal). Make sure that the sensor surface is always kept clean.

▪Touch the on/off sensor (A) for at least 1 second. The cooker hob activates and »0« appears on all the heat setting indicators (B).

▪The subsequent operation must be effected within 20 seconds or the cooker hob will turn off.

If the cooker hob was turned on with the on/off sensor (A), the desired cooking zone can be selected within the next 20 seconds.

•When pressing the sensor (C) for the desired cooking zone, the corresponding display visualises heat setting »0«.

•Pressing sensors »+« (C) or »-« (E) allows for selecting heat settings 1-9.

Pressing and holding sensors »+« (C) or »-« (E) automatically decreases or increases the heat settings. This can also be done by touching the corresponding sensors individually and modifying the heat setting by a single level each time.

The settings can be adjusted only for the selected cooking zone. The display will visualise the symbol »0«, or „H“ if the cooking zone was previously heated (see paragraph relative to residual heat).

19