9
How to Perform A Leak Test - “FIRST TIME USE” and as recommended on previous page
Supplies Needed for a Leak Test:
•Clean paint brush • Water • Dish washing liquid • Empty clean bowl or can for solution
1.Make sure the regulator knob is turned to the “Off” position and verify that the LP Gas Cylinder is tightened securely to the regulator.
2.Mix one part of water with one part of dish washing liquid.
3.Brush mix on Regulator, Propane Cylinder and connection as indicated by the heavy arrows in the figure below
. If “growing” bubbles appear, there is a gas leak.
a.If leak appears at the regulator/cylinder connection, repeat cylinder installation procedure, but do not over- tighten. (NOTE: Only hand tighten) Repeat Leak Test.
b.If the leak is coming from the Gas Cylinder or if the leak cannot be stopped, remove the cylinder and DO NOT USE THE GRILL. Call Customer Service at