Aussie 6T01U00SS1 user manual Drip Tray Access, Table Top Use

Page 5

5

!WARNING

To reduce the risk of serious injury or death from fire or explosion:

•Be sure the grill has cooled completely before removing the drip tray.

•Be sure to empty and re-install the drip tray after each use.

!CAUTION

To reduce the risk of a laceration hazard, wear protective gloves when handling parts that have sharp edges.

Drip Tray Access

The Drip Tray is accessed for cleaning by rotating the spring tab and sliding the tray out from under the grill.

	Note:
	Shown without Igniter	Spring Tab
	Housing for clarity	Spring Tab
	Housing for clarity

Drip Tray

Table Top Use

Unfold the legs, as shown and place grill on a level surface.

When legs are unfolded completely they will snap into the open position. Dimples in the legs help them remain in position. To close, simply ap- ply enough pressure to overcome the friction fit.

Image 5

Contents Table Top Grill 6T01U00SS1 DA N G E RCarbon Monoxide Hazard Tools Required for AssemblyPacking List ContentsRegulator-Valve Housing Assembly Preparation for AssemblyGrill Assembly Instructions Table Top Use Drip Tray AccessLP Regulator Using GasLP Gas Cylinder Disconnecting LP Gas Cylinder Connecting LP Gas CylinderInstallation Codes Before Using Your LP Gas GrillSelecting a Location Performing a Leak TestPage Lighting the Grill Lighting Grill Using the Pulse-Spark IgnitorCheck the Flame Manually Lighting the GrillDirect Cooking on the Grids Cooking On the Gas GrillGrill Cooking Direct Method End of Cooking Session Warming RackStorage and Transportation Controlling Flare-upsHow to Clean the Burners Care and MaintenanceCleaning the Grill Open up Main Burner holes with a small nail or wire Solution ProblemHow to Clean Burners section EmergenciesSee How to Clean Burners in Care and Maintenance TroubleshootingProblem Possible Cause Parts Illustration Key Description Quantity Parts ListMeco Corporation Limited Warranty Limited Warranty