PATIO BASE POST ASSEMBLY | 11 |
|
|
The U26 and U26SS Patio Base Posts are only for use with Broilmaster® Gas Grills. Before proceeding with installation read the Owner’s Manual for the proper location and minimum clearances to combustible materials for your grill and patio base post.
Verify that all parts listed in the exploded view of this product have been included before beginning this installation.
Recommended Tools:
•Two adjustable wrenches or a socket set
•A medium Phillips screwdriver
•Pipe thread sealer or Teflon tape (for gas connections)
•Soapy water solution (to test for leaks)
1
Attach four
NOTE: The large rectangular cut out is located at the front of the post near the top.
FIGURE 1
3
2 | 5 | |
1 | ||
7 |
2
Fasten the bottom of the post to the cast iron patio base using flat washers (1), lock washers (2), and nuts (3). FIGURE 2.
Anchor the base to your patio using the two holes provided in the base. (Hardware not included)
Note: Make sure that the large rectangular cut out is facing in the direction that you want your grill to face. FIGURE 2.
FIGURE 2
8
1
2
3
3
Insert the flex tubing into the post.
The inlet side of the gas tubing may protrude from the bottom of the patio base or through the large circular hole in the back of the square post.
Note: Do not attempt to cut or alter the flex tube in any way.