PATIO BASE POST ASSEMBLY | 13 |
|
|
7
Attach the bracket and slide assembly to the factory installed screw located in the bottom of the grill housing. Figure 6.
Loosen the wing nut and move the slide up or down to accept the grease cup. Be sure to trap the rim of the cup as shown.
Use only noncombustible containers for the grease cup (aluminum or tin cans) do not use combustible containers such as Styrofoam or paper cups.
8
Attach the control housing (10) using two #8 x 1/2 screws (11) or two plastic panel fasteners as shown in Figure 7.
FIGURE 6
FIGURE 7
101
11
11
9
Continue assembly as directed by the Owner’s Manual packaged with the grill head.