GAS Conversion to Natural GAS

1.Remove cooking grids, ﬂavor screen or, briquets and briquet rack from grill.

2.Remove burners and burner shields from grill (one (1) 1/4-20 x 3/4 phillips screw for each burner). See Figure 17.

Figure 17

3.Remove LP burner oriﬁce marked 1.25mm from each oriﬁce ﬁtting. See Figure 18.

8.Remove the hose and regulator from the gas connection on grill with adjustable wrench.

9.Connect the grill to the natural gas supply. Attention: Before lighting your grill check all gas connections including the adjustment screws in valve stems for gas leaks with a soapy water mixture. Caution: Do not use the grill if a gas leak is detect- ed until gas leak is corrected. If a gas leak can not be stopped, do not use grill. You must contact a qualiﬁed repair person.

10.Push valve knobs onto valves.

11.Apply the completed conversion label adjacent to the rating plate label on the grill.

12.The natural gas inlet pressure at the grill is to be set at 7.0" of inlet pressure.

13.Ignite burners on grill and observe ﬂame pattern. If ﬂame is yellow in color or ﬂame is lifting off burner, the air shutter on burners will require adjustment.

14.Beneath the control panel you can access the air shut- ters which are located on the end of the burner tubes.

15.Loosen phillips screw at air shutter, open air shutter for a yellow ﬂame or close air shutter for a lifting ﬂame. Tighten phillips screw at air shutter.

16.Ignite burners on grill to verify burner ﬂame character- istics.

17.Replace ﬂavor screen or briquet rack and briquets and cooking grids.

Figure 18

4.Install natural gas burner oriﬁce marked 49 into each oriﬁce ﬁtting. Apply pipe compound to threads on ori- ﬁces prior to installation.

5.Place burners into grill and insert burner tubes over ori- ﬁce ﬁttings. Secure each burner with one (1) 1/4-20 x 3/4 phillips screw from Step 2.

6.Grasp valve knobs and remove from valves.

7.The low input adjustment screws are located inside the two valve stems. Use a small screwdriver to turn each adjustment screw clockwise 1/4 turn (90 degrees). When valves are in the "OFF" position, the slot in the adjustment screw should be vertical. See Figure 19.

ADJUSTMENT SCREW

Installation must conform to local codes or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/ NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.

Caution: The grill and its individual shutoff valve must be disconnected from the gas supply piping system dur- ing any system pressure testing at test pressures in ex- cess of 1/2 PSIG.

Caution: The grill must be isolated from the gas sup- ply piping system by closing its individual manual shut- off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 PSIG.

NAT LPG

Figure 19

Page 16

B101361-0-1008

T3CAWN-2, T3CFN-2, T3W-2, T3CAW-2, T3CAN-2 specifications

The Broilmaster T3 Series is a collection of high-performance gas grills designed to cater to the needs of outdoor cooking enthusiasts. Among the models, the T3CFWN-2, T3CW-2, T3CFW-2, T3N-2, and T3CWN-2 stand out for their advanced features, durability, and innovative designs.

One of the main features across these models is the heavy-duty cast aluminum construction. This material not only enhances durability but also ensures excellent heat retention and distribution, allowing for even cooking. The grills are designed to withstand the elements while maintaining their stylish appearance. Each model also includes a stainless steel burner system, which is known for its longevity and consistent performance. This feature provides precise heat control, essential for creating perfectly cooked meals.

The T3CFWN-2 model is particularly noted for its dual-level cooking grates, which offer the flexibility to cook different foods at various temperatures simultaneously. Its ceramic infrared rotisserie burner provides an exceptional roasting capability, creating succulent, evenly-cooked meats every time. Similarly, the T3CW-2 boasts an impressive cooking area, perfect for larger gatherings or family feasts.

For those who prefer a more traditional grilling experience, the T3CFW-2 features a convenient side burner, ideal for preparing sauces or side dishes while grilling. The versatile design of the T3N-2 allows it to function as both a grill and a smoker, thanks to its adjustable charcoal tray. This multifunctional aspect maximizes outdoor cooking possibilities.

Sleek aesthetics are another hallmark of the T3CWN-2 model, which incorporates a contemporary design with polished stainless steel accents. Its built-in LED lighting illuminates the grilling surface at night, making it easier to monitor food without having to rely on external light sources.

All models come equipped with electronic ignition systems, ensuring a quick and hassle-free start every time. The built-in thermometer allows for precise temperature monitoring, promoting optimal cooking results. Furthermore, the grease management system facilitates easy cleaning, a vital feature for maintaining the grill’s performance over time.

In summary, the Broilmaster T3 Series, including the T3CFWN-2, T3CW-2, T3CFW-2, T3N-2, and T3CWN-2 models, represents a blend of innovative technology, durable construction, and user-friendly features. These grills are ideal for anyone looking to elevate their outdoor cooking experience, combining functionality with style and reliability.