Checking for Gas Leaks, Air Shutter Adjustment

OPERATION - PROPANE & NATURAL GAS GRILLS

Checking for Gas Leaks

Check for gas leaks every time you connect your Broilmaster propane gas grill to a Propane gas cylinder, when a connected cylinder has not been used recently, or when either a natural or propane grill is being used for the ﬁrst time.

Caution: Do not use an open ﬂame when checking for leaks. Checking for leaks with an open ﬂame may lead to a ﬁre or explosion, resulting in property damage or personal injury.

To check for gas leaks:

1.Use dish washing liquid and a little water to make a soapy solution.

2.Turn OFF the knob on the control panel.

3.Turn ON the gas at the supply or cylinder. A hissing sound indicates a leak. Turn OFF the gas and repair the leak.

4.Apply the soapy water solution to all gas connections.

5.Look for bubbles. Bubbles indicate a leak.

6.If there are bubbles turn OFF the gas and repair the leak.

7.Turn the gas back ON and repeat the above procedures until all leaks are repaired.

Air Shutter Adjustment

The burner (venturi) tube air shutter is preset at the factory so that after ﬁve minutes the burner ﬂames are blue with well deﬁned cones. If, after ﬁve minutes the ﬂame is yellow, or there is a gap between the burner and the ﬂame, adjust the burner (venturi) tube air shutter as follows:

1.Turn gas OFF and let the burner cool.

2.Beneath the control panel you can access the air shutter(s) which are located on the end of the burner tubes.

3.Loosen shutter set screw

4.Close the air shutter to the minimum opening.

5.Light the burner, wait ﬁve minutes and then carefully open the air shutter until the ﬂame is blue and well deﬁned.

6.Retighten the set screw.

Operating Instructions

Before each use, inspect all hoses. If it is evident there is excessive abrasion or wear, or the hose is cut, it must be replaced prior to using your Broilmaster grill. Call your local Broilmaster dealer for a replacement.

Using the Ignitor

Caution: If a burner fails to light after 5 seconds, turn the burner OFF for 5 minutes, to allow the gas to clear, then try again.

Note: Each burner must be lit individually.

1.Turn knob on the grill CLOCKWISE to the OFF posi- tion.

2.Turn ON gas at the source.

3.With the grill lid open, push and turn the burner control knob COUNTERCLOCKWISE to Hi.

4.Push and hold the ignitor button until the burner lights (approximately 5 seconds).

5.If a burner does not light, turn OFF all gas and refer to the Troubleshooting section of this manual.

6.Repeat steps 3 through 5 for other burner.

Using Matches

Caution: If a burner fails to light after 5 seconds, turn the burner OFF for 5 minutes, to allow the gas to clear, then try again.

Note: Each burner must be lit individually.

1.Turn knob on the grill CLOCKWISE to the OFF posi- tion.

2.Turn ON gas at the source.

3.Open the grill lid.

4.Insert a burning long wooden match through the lighter hole on either side of the grill. See Figure 20.

5.Turn the burner control knob COUNTERCLOCKWISE to HI.

6.If a burner does not light, turn OFF all gas and refer to the Troubleshooting section of this manual.

7.Repeat steps 3 through 6 for other burner.

Figure 20

Page 18

B101361-0-1008

T3CAWN-2, T3CFN-2, T3W-2, T3CAW-2, T3CAN-2 specifications

The Broilmaster T3 Series is a collection of high-performance gas grills designed to cater to the needs of outdoor cooking enthusiasts. Among the models, the T3CFWN-2, T3CW-2, T3CFW-2, T3N-2, and T3CWN-2 stand out for their advanced features, durability, and innovative designs.

One of the main features across these models is the heavy-duty cast aluminum construction. This material not only enhances durability but also ensures excellent heat retention and distribution, allowing for even cooking. The grills are designed to withstand the elements while maintaining their stylish appearance. Each model also includes a stainless steel burner system, which is known for its longevity and consistent performance. This feature provides precise heat control, essential for creating perfectly cooked meals.

The T3CFWN-2 model is particularly noted for its dual-level cooking grates, which offer the flexibility to cook different foods at various temperatures simultaneously. Its ceramic infrared rotisserie burner provides an exceptional roasting capability, creating succulent, evenly-cooked meats every time. Similarly, the T3CW-2 boasts an impressive cooking area, perfect for larger gatherings or family feasts.

For those who prefer a more traditional grilling experience, the T3CFW-2 features a convenient side burner, ideal for preparing sauces or side dishes while grilling. The versatile design of the T3N-2 allows it to function as both a grill and a smoker, thanks to its adjustable charcoal tray. This multifunctional aspect maximizes outdoor cooking possibilities.

Sleek aesthetics are another hallmark of the T3CWN-2 model, which incorporates a contemporary design with polished stainless steel accents. Its built-in LED lighting illuminates the grilling surface at night, making it easier to monitor food without having to rely on external light sources.

All models come equipped with electronic ignition systems, ensuring a quick and hassle-free start every time. The built-in thermometer allows for precise temperature monitoring, promoting optimal cooking results. Furthermore, the grease management system facilitates easy cleaning, a vital feature for maintaining the grill’s performance over time.

In summary, the Broilmaster T3 Series, including the T3CFWN-2, T3CW-2, T3CFW-2, T3N-2, and T3CWN-2 models, represents a blend of innovative technology, durable construction, and user-friendly features. These grills are ideal for anyone looking to elevate their outdoor cooking experience, combining functionality with style and reliability.