The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

1.Depress clutch/brake pedal all the way down and hold.

2.Pull parking brake lever up and release pressure from clutch/brake pedal. Pedal should remain in brake position. Make sure parking brake will hold trac- tor secure.

Attachment Clutch Lever

"En Position

inition Key

,"Disengaged" Position

IMPORTANT: Leaving the ignition switch in any position other than "STOP" will cause the battery to discharge and go dead.

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may

cause "browning" of grass. To eliminate this possibility, always stop engine when

stopping tractor on grass areas.

_('_CAUTION: Always stop tractor com-

pletely, as described above, before leaving the operator's position.

TO USE THROTTLE CONTROL

Always operate engine at full throttle.

•Operating engine at less than full throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower performance.

Clutch/ Brake

Brake

"Engaged" Position

Gearshift

Lever

TO MOVE FORWARD AND BACKWARD

The direction and speed of movement is controlled by the gearshift lever.

1. Start tractor with clutch/brake pedal de-

pressed and gearshift lever in neutral

(N) position.

"Disengaged" "Brake"

PositionPosition

STOPPING

MOWER BLADES -

•To stop mower blades, move attachment clutch lever to disengaged position.

GROUND DRIVE -

•To stop ground drive, depress clutch/ brake pedal all the way down.

•Move gearshift lever to neutral (N) position.

ENGINE -

• Move throttle control between half and

full speed (fast) position.

NOTE: Failure to move throttle control between half and full speed (fast) posi-

tion, before stopping, may cause engine to "backfire".

•Turn ignition key to "STOP" position and

remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

2.

Move

gearshift

lever to desired po-

 

sition.

 

 

3.

Slowly

release

clutch/brake pedal to

 

start

movement.

IMPORTANT: Bring tractor to a complete stop before shifting or changing gears. Failure to do so will shorten the useful life of your transaxle.

TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heights are mea- sured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

13

Page 12 Page 14
Page 13
Image 13
Craftsman 917.273134 HOW to USE Your Tractor, To SET Parking Brake, To USE Throttle Control, To Move Forward and Backward
Page 12 Page 14

917.273134 specifications

The Craftsman 917.273134 is a remarkable lawn tractor that stands out in the realm of outdoor power equipment. Designed for homeowners seeking a reliable and efficient solution for maintaining their lawns, this tractor combines performance and user-friendly features, making lawn care tasks simpler and more enjoyable.

One of the key attributes of the Craftsman 917.273134 is its powerful engine. Equipped with a robust 19 horsepower Briggs & Stratton engine, this lawn tractor delivers dependable performance and is capable of handling challenging terrains and heavier workloads. The engine is designed for easy starting and efficient fuel consumption, allowing users to complete their mowing tasks without frequent refueling interruptions.

The cutting deck is another prominent feature of the 917.273134. With a 42-inch cutting width, it enables users to quickly and efficiently cover large areas of grass. The deck features a three-blade system that ensures a clean and even cut, minimizing the need for multiple passes and reducing the overall mowing time. Additionally, the height of the cutting deck is adjustable, allowing users to choose the perfect grass length for their specific lawn needs.

User comfort and control are essential elements of the Craftsman 917.273134 design. It boasts a comfortable high-back seat that provides excellent support, especially during longer mowing sessions. The tractor is equipped with an intuitive dashboard displaying essential information, such as fuel level and engine status, allowing users to monitor the tractor’s health easily.

Moreover, the Craftsman 917.273134 integrates advanced technologies, such as an automatic transmission system that provides seamless gear shifting, allowing users to maintain optimal speed according to the terrain without manually shifting gears. This feature greatly enhances maneuverability and ease of use, making it accessible for operators of all skill levels.

Safety is also a priority in the design of this lawn tractor. It is equipped with safety features such as a automatic shutoff when the operator leaves the seat, preventing accidents while in operation. The durable construction of the Craftsman 917.273134 ensures its longevity and reliability, making it a worthy investment for any homeowner seeking a quality lawn care solution.

In summary, the Craftsman 917.273134 is a versatile and powerful lawn tractor that effectively meets the needs of today’s homeowners. With its robust engine, efficient cutting system, user-friendly design, and advanced technologies, it stands out as a top choice for maintaining lush and healthy lawns.
Top Page Image Contents