TO ATTACH JUMPER CABLES -

1.Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK

cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

Weak or Dead Fully Charged

BatteryBattery

REPLACING BATTERY

/ILWARNING: Do not short battery ter- minals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

1.Lift seat pan to raised position.

2.Disconnect BLACK battery cable first

then RED battery cable and carefully remove battery from tractor.

3.Install new battery with terminals in same position as old battery.

4.First connect RED battery cable to positive (+) terminal with hex bolt and

keps nut as shown. Tighten securely. Slide terminal cover over terminal

5.Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

Seat

Terminal Cover

(Red)

CableNegative (Black) Cable

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Pull bulb holder out of the hole in the backside of the grill.

3.Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

4.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause

your tractor to run poorly, stop running, or prevent it from starting.

• Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type

plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL AS- SEMBLY

1.Raise hood.

2.Unsnap headlight wire connector.

3.Stand in front of tractor. Grasp hood at

sides, tilt toward engine and lift off of tractor.

4.When replacing hood, be sure to re- connect the headlight wire connector.

_._I Hood

Headlight Wire

25

Page 25
Image 25
Craftsman 917.273134 owner manual Replacing Battery, To Remove Hood and Grill AS- Sembly

917.273134 specifications

The Craftsman 917.273134 is a remarkable lawn tractor that stands out in the realm of outdoor power equipment. Designed for homeowners seeking a reliable and efficient solution for maintaining their lawns, this tractor combines performance and user-friendly features, making lawn care tasks simpler and more enjoyable.

One of the key attributes of the Craftsman 917.273134 is its powerful engine. Equipped with a robust 19 horsepower Briggs & Stratton engine, this lawn tractor delivers dependable performance and is capable of handling challenging terrains and heavier workloads. The engine is designed for easy starting and efficient fuel consumption, allowing users to complete their mowing tasks without frequent refueling interruptions.

The cutting deck is another prominent feature of the 917.273134. With a 42-inch cutting width, it enables users to quickly and efficiently cover large areas of grass. The deck features a three-blade system that ensures a clean and even cut, minimizing the need for multiple passes and reducing the overall mowing time. Additionally, the height of the cutting deck is adjustable, allowing users to choose the perfect grass length for their specific lawn needs.

User comfort and control are essential elements of the Craftsman 917.273134 design. It boasts a comfortable high-back seat that provides excellent support, especially during longer mowing sessions. The tractor is equipped with an intuitive dashboard displaying essential information, such as fuel level and engine status, allowing users to monitor the tractor’s health easily.

Moreover, the Craftsman 917.273134 integrates advanced technologies, such as an automatic transmission system that provides seamless gear shifting, allowing users to maintain optimal speed according to the terrain without manually shifting gears. This feature greatly enhances maneuverability and ease of use, making it accessible for operators of all skill levels.

Safety is also a priority in the design of this lawn tractor. It is equipped with safety features such as a automatic shutoff when the operator leaves the seat, preventing accidents while in operation. The durable construction of the Craftsman 917.273134 ensures its longevity and reliability, making it a worthy investment for any homeowner seeking a quality lawn care solution.

In summary, the Craftsman 917.273134 is a versatile and powerful lawn tractor that effectively meets the needs of today’s homeowners. With its robust engine, efficient cutting system, user-friendly design, and advanced technologies, it stands out as a top choice for maintaining lush and healthy lawns.