MAINTENANCE SCHEDULE
REGULAR SERVICE
| Check | Brake Operation | _, | ||
| Check | Tire | Pressure |
| |
| Check | Operator | Presence | and | |
T | interlock | Systems |
|
| |
a | Check | for | Loose | Fasteners |
|
| Sharpen/Replace | Mower | Blades | ||
T | Lubrication | Chart |
|
|
0Check Battery Level
aClean Battery and Terminals Check Transaxle Cooling Check
Check Engine Oil Level
Change Engine Oil (with oll filter)
EChange Engine Oil (without oll filter)
N Clean Air Filter
GClean Air Screen
Inspect Muffler/Spark Attester
EReplace Oil Filter (if equipped) Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge Replace Fuel Filter
1- Change more often when operating under a heavy load or in high ambient temperatures.
2 - SerVice more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made periodically to properly maintain your tractor.
All adjustments in the Service and Adjust- ments section of this manual should be
checked at least once each season.
•Once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper
BEFORE EACH USE
1.Check engine oil level.
2.Check brake operation.
3.Check tire pressure.
4.Check operator presence and interlock systems for proper operation.
5.Check for loose fasteners.
_"_,_'_ _, ___._o_ _
DATES
II
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with
5 = Tighten front axle pivot bolt to 35 ft.dbs, maximum. Do not overtigbfen.
LUBRICATION CHART
@ Spindle |
| - @ Spindle |
Zerk |
| Zerk |
@Front Wheel |
| @Front Wheel |
Bearing |
| Bearing Zerk |
Zerk |
|
|
@En |
|
|
I |
| "d)Gear- |
,' ,' | o_,I | I shift |
....... |
| Pivots |
_SAE 30 or 10w30 MOTOR OIL |
| |
@General Purpose | Grease |
|
@Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the pivot points which have special nylon
bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the
17