GRILL ASSEMBLY
4.Slide ignitor spacers (11) onto collector box assem- blies (10) and secure with nuts. See Figure 5. Attention: Do not cut or damage ignitor wires.
Figure 5
5.Insert collector box assemblies into holes adjacent to burners. The opening of the collector box should be facing the burner. See Figure 6.
6.Attach ignitor ground wire ends onto ground lugs. Slide ground lugs (12) over ignitor wires and onto collector box assemblies. Slide nuts over ignitor wires and se- cure collector box assemblies to grill. See Figure 7.
Figure 7
7.Remove ignitor from the control panel by unscrewing the ignitor button and nut. Attach ignitor wires to termi- nals on the ignitor. See Figure 8.
Figure 6
Figure 8
Page 10 |