321 Studios D1692-BXX technical manual Add-on modules / Upgrading, Installing the Processors

Page 25

Add-on modules / Upgrading

Add-on modules / Upgrading

Installing the Processor(s)

The mainboard D1692 supports the latest 64-bit processor technologies from AMD. Only AMD Opteronprocessor 200 series are certified and supported with this motherboard.

If using a single processor, it MUST be installed in socket CPU0. When using a single i processor only CPU0 memory banks are addressable.

There must be used identical processors for CPU0 and CPU1.

Fujitsu Siemens Computers is not liable for damage as a result of operating an unsupported configuration.

The diagram is provided as a visual guide to help you install socket processors and may not be an exact representation of the processors you have.

Lift the lever on the socket until it is approximately 90o or as far back as possible to the socket.

Align the processor with the socket. There are keyed pins underneath the processor to ensure that the processor is installed correctly.

Seat the processor firmly into the socket by gently pressing down until the processor sits flush with the socket.

Place the socket lever back down until it locks into place.

Your processor is installed.

Repeat these steps for the second processor if you are using two processors.

A26361-D1692-Z121-1-7619, Edition 1

15

Image 25
Contents Answers Are there Page A26361-D1692-Z121-1-7619 Technical Manual Mainboard D1692 BxxPage Page Page Contents Page Notational conventions Mainboard D1692-BxxInformation about boards Important notesList of features Software Specifications Integrated PCI FirewireIntegrated Audio Integrated Sata ControllerD1692 Block Diagram Board InstallationJumper Legend Board Parts, Jumpers and ConnectorsJ4, J14, J34, J39, J42 and J43 PCI-X Slots 3 & 4 Force PCI Mode Jumper J39 SMBus 1.1 Connector J4Onboard Buzzer/Speaker header J14 Clear Cmos Jumper J34Front Panel Audio Header J43 COM2 Header J42J42 COM2 Header J43 Front Panel Audio HeaderBoard Parts, Jumpers and Connectors USB E/F Front Panel Header J46 Firewire Disable Jumper J69PCI-X Slots 1 & 2 Bus Speed Override J53 Intr Chassis Intrusion Header J77Sata Serial ATA Controller Disable J112 Gigabit Ethernet Disable J87RCV Bios Recovery J7 Front Panel Header J86USB D with Chipcardreader support J11 Bios Write Protect J8LCD header J45 Remote Temp J117CPU and System Fan Specifications CPU and Chassis Fan ConnectorsAdd-on modules / Upgrading Installing the ProcessorsHeat sink Installation Installing the Memory Memory Installation Procedure Floppy Drives Attaching Drive CablesRear Audio Connectors Connecting AUX/CD Sound Cables & SpeakersInstalling Add-In Cards Connecting External Devices Disconnect power supply from electrical outlet Installing the Power SupplySo will damage the motherboard and/or other components Replacing lithium battery Bios Recovery Bios updateWhen should a Bios update be carried out? How does a Bios update work?Glossary