321 Studios D1692-BXX technical manual Replacing lithium battery

Page 34

Add-on modules / Upgrading

Replacing lithium battery

In order to permanently save the system information, a lithium battery is installed to provide the CMOS-memory with a current. A corresponding error message notifies the user when the charge is too low or the battery is empty. The lithium battery must then be replaced.

!

Incorrect replacement of the lithium battery may lead to a risk of explosion!

The lithium battery may be replaced only with an identical battery or with a type

 

recommended by the manufacturer.

Do not throw lithium batteries into the household waste. They must be disposed of in accordance with local regulations concerning special waste.

Ensure that you insert the battery the right way round. The plus pole must be on the top!

The lithium battery holder exists in different designs that function in the same way.

2

3

3

2

3

1

ÊPress the locking lug in the direction of the arrow; the battery jumps somewhat out of the holder (1).

ÊRemove the battery (2).

ÊInsert a new lithium battery of the same type into the socket (3).

24

A26361-D1692-Z121-1-7619, Edition 1

Image 34
Contents Answers Are there Page A26361-D1692-Z121-1-7619 Mainboard D1692 Bxx Technical ManualPage Page Page Contents Page Mainboard D1692-Bxx Notational conventionsImportant notes Information about boardsList of features Integrated Audio Integrated PCI FirewireSoftware Specifications Integrated Sata ControllerBoard Installation D1692 Block DiagramBoard Parts, Jumpers and Connectors Jumper LegendJ4, J14, J34, J39, J42 and J43 Onboard Buzzer/Speaker header J14 SMBus 1.1 Connector J4PCI-X Slots 3 & 4 Force PCI Mode Jumper J39 Clear Cmos Jumper J34J42 COM2 Header COM2 Header J42Front Panel Audio Header J43 J43 Front Panel Audio HeaderBoard Parts, Jumpers and Connectors PCI-X Slots 1 & 2 Bus Speed Override J53 Firewire Disable Jumper J69USB E/F Front Panel Header J46 Intr Chassis Intrusion Header J77RCV Bios Recovery J7 Gigabit Ethernet Disable J87Sata Serial ATA Controller Disable J112 Front Panel Header J86LCD header J45 Bios Write Protect J8USB D with Chipcardreader support J11 Remote Temp J117CPU and Chassis Fan Connectors CPU and System Fan SpecificationsInstalling the Processors Add-on modules / UpgradingHeat sink Installation Installing the Memory Memory Installation Procedure Attaching Drive Cables Floppy DrivesConnecting AUX/CD Sound Cables & Speakers Rear Audio ConnectorsInstalling Add-In Cards Connecting External Devices Disconnect power supply from electrical outlet Installing the Power SupplySo will damage the motherboard and/or other components Replacing lithium battery When should a Bios update be carried out? Bios updateBios Recovery How does a Bios update work?Glossary