Weber SUMMIT GRILL CENTER Rotisserie Troubleshooting, Maintenance, Weber SPIDER/INSECT Screens

Page 24

24

Rotisserie Troubleshooting

 

 

 

Problem

Check

Cure

 

 

 

Rotisserie burner does not light.

Did you hold the burner control knob in and

Try to relight burner by holding burner control knob in and continue holding in until

 

hold in for 20 seconds until after burner

20 seconds after burner has ignited.

 

ignited?

 

 

 

 

 

Did you wait to see the entire ceramic surface

When relighting burner by holding burner control knob in, wait to see the entire

 

become alight before counting 20 seconds?

ceramic surface become alight before counting 20 seconds?

 

 

 

 

Did you repeatedly use the snap ignition until

After waiting five minutes for gas to clear, try repeatedly using the snap igniter until

 

the burner ignited?

the burner ignites (refer to “Lighting the Rotisserie Burner”).

 

 

 

 

Does the igniter work (Do you see a spark

Try manually lighting the burner (refer to “Lighting the Rotisserie Burner”). Call

 

when you repeatedly use the snap igniter?

customer service.

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

Maintenance

WEBER® SPIDER/INSECT SCREENS

Your Weber® gas barbecue, as well as any outdoor gas appliance, is a target for spiders and other insects. They can nest in the venturi section (1) of the burner tubes. This blocks the normal gas flow, and can cause the gas to flow back out of the combustion air opening. This could result in a fire in and around the combustion air openings, under the control panel, causing serious damage to your barbecue.

The burner tube combustion air opening is fitted with a stainless steel screen (2) to prevent spiders and other insects access to the burner tubes through the combustion air openings.

We recommend that you inspect the Spider/Insect screens at least once a year. (See Section “Annual Maintenance”.) Also inspect and clean the the Spider/Insect screens if any of the following symptoms should ever occur:

1)The smell of gas in conjunction with the burner flames appearing yellow and lazy.

2)Barbecue does not reach temperature.

3)Barbecue heats unevenly.

4)One or more of the burners do not ignite.

mDANGER

Failure to correct the above mentioned symptoms may result in a fire, which can cause serious bodily injury or death, and cause damage to property.

1

2

www.weber.com®

Image 24
Contents Gas Grill Wash hands after handling this product Liquid Propane GAS Units onlyWarranty Exploded view S-660 Exploded view list S-660 Cleaning General InstructionsOperating StorageInstall Gas Supply General Specifications for PipingGas Instructions Gas Line PipingWhat is Natural GAS? Type of GASLeak Check Preparation Check for Gas Leaks Remove control panelGas Instructions Reinstall control panel CheckOperating Instructions Control knob to OFF and wait 5 minutes to let the gas clearBefore you try again or try to light with a match Lighting To ExtinguishOperating Instructions Direct cooking Indirect cookingGrilling Tips & Helpful Hints Using the Sear Station Sear Station Burner LightingAdjacent Main Burner Snap Ignition To Use the Sear StationTo ignite the Sear Station burner continue with Step To ExtinguishUsing the Smoker Cleaning the SmokerTo USE the Smoker Lighting the Smoker Burner Manually Lighting the Smoker Burner Operating Instructions Cooking Lighting the Rotisserie BurnerRotisserie Burner Snap Ignition Operating Instructions Troubleshooting Problem Check CureOperating the Handle Light With aluminum foilRotisserie Troubleshooting MaintenanceWeber SPIDER/INSECT Screens Main Burner Cleaning Procedure Replace Main BurnersRemoving the sear Station Burner Annual Maintenance Burner Flame PatternPage Page WEBER-STEPHEN Products CO Je préfère recevoir des informations en espagnol Pour les achats effectués aux États-Unis