Philips HF3332/60 manual Setting the clock, Setting the timer

English 13

3Place the goLITE BLU approximately 20-30 in./50-70cm from your

eyes in such a way that the light bathes your face from the side (Fig. 5).

-- You can read, eat, work at the computer, watch TV or exercise while you use your goLITE BLU energy light.

-- For the best results, place the goLITE BLU at the same level as your midriff (stomach area), e.g. place it on the table at which you are sitting.

Note: Do not stare into the light of the LED panel. It is sufficient that the blue light reaches your eyes indirectly from the side.

-- Use your goLITE BLU in a well-lit room to minimize eye strain.

Setting the clock

1

,,

2

,,

3

4

5

Press the on/off button briefly to turn on the appliance (Fig. 6). The touchscreen display goes on.

Press the alarm button and the timer button simultaneously for 2 seconds (Fig. 7).

The clock time starts to flash on the display (Fig. 8).

Set the clock time with the plus or minus button. If you keep the button pressed, the time moves forward or backward quickly (Fig. 9).

To switch between the 12-hour (a.m./p.m.) and 24-hour time indication, press the timer button and minus button simultaneously for 2 seconds.

Press either the alarm button or the timer button or wait 10 seconds to exit the time-setting mode.

Setting the timer

You can use the timer function to set the light time.

1Press the on/off button briefly to turn on the appliance (Fig. 6).

,, The touchscreen display goes on.

2Press the timer button (Fig. 10).