Polk Audio RMSERIES RM7500 instruction manual To determine proper input jack for your system, see

YOUR SUBWOOFER OUTPUT:

FILTERED OR UNFILTERED?

Use the “speaker set-up” or “bass manage- ment” function of your Dolby Digital proces- sor to select subwoofer as “on” or “yes.”

EASIEST HOOK UP OPTION

FIGURE 5 (Refers to Hook Up Option #1 on Chart, Pages 6-7)

In Dolby® Pro Logic® systems the subwoofer output jack will always be “ON.” Connect the subwoofer output jack to the “LFE/Subwoofer” input of the subwoofer. Disconnect the other speakers in the system so that all you can

hear is the subwoofer. Play music or a movie	woofer itself. If all you can hear is bass,
with vocal content. If you can hear and	and the vocals are not at all or barely
understand the words, your output jack is	audible, then your subwoofer input jack is
not filtered, in which case you want to use	filtered and you should use the subwoofer’s
one of the (line level) “in” jacks on the sub-	“LFE/Subwoofer In.”

FIGURE 6 (Refers to Hook Up Option #2 on Chart, Pages 6-7)

Alternate Hook-Up Option*

* To determine proper input jack for your system, see

“Your Subwoofer Output: Filtered Or Unfiltered?” (above).

2

8 9