Weber 55143 Weber Spider Stopper Guards, See Section B Install manifold bracket, See Section a

Page 36

Addendum Sheet

You may have a different style manifold bracket and Spider Stopper Guard listed in your instruction manual. If you do, please follow these steps below in place of the steps included in the manual.

Assembly Instructions

* See Section B *

Install manifold bracket

You will need: manifold bracket

Hook the bracket(2) onto the manifold at the center burner valve. Place your hand underneath the bracket. Lift the manifold and cooking box slightly, then hook the tab of the bracket on the frame brace(1).

(1)(2)

* See Section A *

Manifold Support Bracket - 1

* See Section D *

Operating

General Maintenance

Weber Spider Stopper™ Guards

Your Weber Gas Barbecue, as well as any outdoor gas appliance, is a target for spiders and other insects. They can nest in the venturi section (Venturi(1), air shutter(2), venturi fin(3) ) of the burner tubes. This blocks the normal gas flow, and can cause the gas to flow back out of the air shutter. This could result in a fire in and around the air shutters, under the control panel, causing serious damage to your barbecue.

The Weber Spider Stopper™ Guard(1) is factory installed. It fits tightly around the air shutter section of the burner tube and the valve, thereby preventing spiders and other insects access to the burner tubes through the air shutter openings.

(1)

We recommend that you inspect the Weber Spider Stopper Guards at least once a year. (See Section “Annual Maintenance”.) Also inspect and clean the Spider Stopper Guards if any of the following symptoms should ever occur:

1

ADD US 09/30/00

Image 36
Contents Owners Guide Liquid Propane GAS Units only Warranty Customer Service Center Roselle Road, Suite Schaumburg, ILContents For Installation in Canada StorageOperating Genesis Silver-B LP Manifold, Hose and regulator assembled Page Page Page Assemble wheel frame Assemble frameContinue frame assembly Complete frame assemblyInsert casters Add Wrap-around Frame PanelAdd cooking box assembly Install manifold brackets Install cylinder panelInstall igniter Add fuel gaugeFill liquid propane cylinder Check that all burner valves are offChecking the fuel level in your tank Page Install the slide out bottom tray Install Lid Installing Features You will need work surface Do not use the work surface as a cutting boardInstalling the warming rack Install the thermometerInstalling the Warm-Up Basket Install the bottom shelfCast Iron Cooking Grates Care Instructions Lighting To ExtinguishManual Lighting Cleaning CookingStorage and/or Nonuse Refilling the Liquid Propane Cylinder Removal of the LP cylinderImportant LP Cylinder Information To Connect the hose to the cylinder Liquid Propane CylinderSafe handling tips for Liquid Propane Gas Cylinders For Canada OnlyLiquid Propane LP Cylinders Liquid Propane Cylinder requirementsAnnual Maintenance CheckGeneral Maintenance Main Burner Cleaning ProcedureWeber Spider /Insect screens Main Burner Flame PatternReplacing Main Burners Crossover Ignition System Operations Barbecue temperature only Flame is low when burner is onBurners burn with a yellow or Orange flame, in conjunction withSee Section B Install manifold bracket Weber Spider Stopper GuardsSee Section a See Section D