Weber 600 manual Check That Burners are OFF, Connect GAS Supply

Page 8

CHECK THAT BURNERS ARE OFF

You will need: one burner control knob.

Valves are shipped in the off position, but you should check to be sure. Put the knob on each valve. Check by pushing down and turning clockwise. If they do not turn, they are OFF. Proceed to the next step. Figure 14.

Figure 14

CONNECT GAS SUPPLY

mWARNING

Make sure all burner control knobs are in the OFF position, including the side burner, if the barbecue has a side burner.

To connect the natural gas supply, slide back the collar of the quick disconnect. Push male fitting of the hose into the quick disconnect, and maintain pressure. Figure 15 (a). Slide the collar closed. Figure 15 (b). If it does not engage or lock, repeat procedure. Gas will not flow unless the quick disconnect is properly engaged.

 

 

 

 

 

Locking shut off

To barbecue

 

(a)

Outside house wall

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Male fitting

Collar

(b)

Quick disconnect engaged

Figure 15

8

Image 8
Contents Summittm 400 Install GAS Supply General Specifications for PipingSupplies Needed Remove Packaged ContentsTools Needed Install Splash Guards Connect Flexible Hose to RegulatorInstall Flavorizer Bars Install Bottom Tray ADD Cooking GratesADD Accessory Rack ADD Tool HoldersCheck That Burners are OFF Connect GAS SupplyCheck for GAS Leaks Summit Reinstall Front Panel Refer to Operating Guide Before Lighting Barbecue Reinstall Control PanelReinstall Burner Control Knobs Page Exploded View for Summit 400 NG Replacement Parts List for Summit 400 NG Exploded View for Summit 600 NG Replacement Parts List for Summit 600 NG Page