10 | GAS INSTRUCTIONS |
|
|
Check:
1) | Main gas line to manifold connection. |
|
|
| |
2) | Rotisserie (I.R. Burner) gas line connection. |
|
|
| |
3) | Bulkhead and gas supply hose connection. |
|
|
| |
4) | Bulkhead to regulator connection. |
|
|
| |
5) | Regulator to hose connection. |
|
|
| |
| WARNING: If there is a leak at connection (1, 2, 3, 4, or 5), |
|
|
| |
| retighten the fitting with a wrench and recheck for leaks |
|
|
| |
| with soap and water solution. | 2 | |||
If a leak persists after | |||||
DO NOT OPERATE THE GRILL. Contact the Customer Service |
|
|
| ||
Representative in your area using the contact information on |
|
|
| ||
our web site. Log onto www.weber.com®. | 1 | ||||
6) | Gas supply to shutoff connection. | ||||
|
|
| |||
7) | Valves to manifold connections. |
|
|
| |
| WARNING: If there is a leak at connections (6 or 7), turn |
|
|
| |
| off the gas. DO NOT OPERATE THE GRILL. Contact the |
|
|
| |
|
|
|
| ||
| Customer Service Representative in your area using the |
|
|
| |
| contact information on our web site. Log onto |
|
|
| |
| www.weber.com®. |
|
|
| |
When leak checks are complete, turn gas supply off at the source and |
|
|
| ||
rinse connections with water. |
|
|
| ||
|
|
| |||
REINSTALL CONTROL PANEL |
|
|
| ||
Parts required: control panel, screws and burner control knobs. |
|
|
| ||
Hook the top edge of the control panel onto the control panel brackets |
|
|
| ||
on either side of the front of the cooking box. |
|
|
| ||
Line up screws with screw holes on both the control panel bracket and | 3 |
|
| ||
the frame. Tighten screws. |
|
| |||
Place corresponding control knobs onto the valve stems. | 4 |
|
| ||
|
|
|
| ||
|
| 5 |
|
| |
|
| 7 | |||
6
*The grill illustrated may have slight differences than the model purchased.
WWW.WEBER.COM®