Weber Platinum B manual You will need right work surface, two 1/2 inch bolts

Page 16

	Reinstall control panel (after checking for gas		Install Right Work Surface
	leaks)		You will need right work surface, two 1/2 inch bolts,
	(1)	Set the control panel in place over both sides of	two nylon washers and a 7/16 inch or adjustable
		the frame. Hold the crossover ignition button up	wrench.
		while setting the control panel in place.	Insert the right work surface tabs in the slots In the
	(2)	Line up the control panel with the white plastic	frame(1). Slip washers on the bolts and insert the bolts
		plugs in the frame brace. Insert screws and tighten	as shown(2). Tighten
		with a Phillips screwdriver until snug. Do not
		overtighten.		(2)
	(3)	Push each of the burner control knobs onto their	(1)	(2)
	(3)	Push each of the burner control knobs onto their	(1)
		valve.
	(4)	Reinstall Side Burner cover.

(1)

(3)

(2)

C-4

Image 16

Contents Genesis PLATINUM-B Liquid Propane GAS Units only South Hicks Road Customer Service CenterPalatine, IL Contents Gas Supply Testing For Installation in CanadaStorage OperatingGenesis Platinum-B NG Manifold, Hose and regulator assembled Page Packaging requires at least two people Page Cooking box with finger grip toward you1 Num foil. It can cause grease fires by trappingGrease and not allowing grease to flow into Catch panInstalling Smoker Box Installing the warming rackInstall the bottom shelf As shown2. Tighten Frame1. Slip washers on the bolts and insert the boltsCheck that all burner valves are off Do not use an open flame to check for Gas leaks. Be sure there are no sparks orOpen flames in the area while you check For leaks. Sparks or open flames willPage You will need right work surface, two 1/2 inch bolts Lighting To ExtinguishManual Lighting Cooking CleaningStorage Annual Maintenance Inspection and Cleaning of the Weber Spider Stopper GuardsMain Burner Cleaning Procedure General MaintenanceWeber Spider Stopper Guards Replacing Main Burners Crossover Ignition System Operations Flame is low when burner is on Burners burn with a yellow orOrange flame, in conjunction with Smell of gas