MAINTENANCE
11.Lift and twist the burner assembly slightly, to sepa- rate the Crossover® tube (a) from the burners (b).
12.Remove the Crossover® tube.
(b)(b)
(a)
CAUTION: The burner openings (1) must be posi- tioned properly over the
valve orifices (2).
(2) |
(1) |
13.Pull the selected burner(s) tube(s) from manifold frame and replace with a new burner tube.
14.To reinstall the manifold assembly, reverse steps 7 through 13.
Check proper assembly before fastening manifold in place.
WARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solu- tion before using the grill. (See, “Check for gas leaks.”)
14