4 |
|
mWARNING: All countertop finished surfaces must be constructed of a noncombustible material.
|
|
| Tolerances | |
|
|
|
|
|
1 | 30 1/4" (768.35 mm) | 38 1/4" (971.55 mm) | + 1/4" | - 1/4" (6.35mm) |
2 | 34 3/8" (873.13 mm) | 34 3/8" (873.13 mm) | + 1/4" | - 1/4" (6.35mm) |
3 | 23" (584.2 mm) | 23" (584.2 mm) | + 1/4" | - 1/4" (6.35mm) |
General construction details |
| |
Summit® |
| |
before construction begins. | 1 | |
All dimensions have a tolerance of plus or minus | ||
| ||
(6.35 mm). |
| |
The grill frame rests directly on the Island Structure top |
| |
finished surface. Make sure this surface is level. Do not |
| |
support the grill from the bottom. |
|
If the supporting structure is going to have an electrical
outlet for a rotisserie, it should be on the left side of the6 structure.
a
3
1 d
5 | 2 | 4 |
| ||
|
| |
3 |
| c |
8 | b |
|
|
|
2
b
1
1
7
|
| |||
|
|
|
| |
| 1 | 24 minimum* (610 mm) | 24 minimum* (610 mm) | |
Dimensions | 2 | 4 3/4 (120.65 mm) | 4 3/4 (120.65 mm) | |
3 | 6 1/4 (158.75 mm) | 6 1/4 (158.75 mm) | ||
| ||||
| 4 | 10 1/2 (266.7 mm) minimum | 10 1/2 (266.7 mm) minimum | |
| 5 | 23 (584.2 mm) | 23 (584.2 mm) | |
| 6 | 34 3/8 (873.13 mm) | 34 3/8 (873.13 mm) | |
| 7 | 27 (685.8 mm) minimum distance from front edge of | 27 (685.8 mm) minimum distance from front edge of | |
|
| the cutout for open lid clearance | the cutout for open lid clearance | |
| 8 | 30 1/4 (768.35 mm) | 38 1/4 (971.55 mm) | |
aNote: For a countertop treatment: Recommended 3/4 (19.1 mm) overhang. Notch front edge for frame to fully slide in.
bGas Inlet
cSide Burner Opening
dAccess for electric on left hand side
*Clearance from any surface or structure is at least 24 (609.6mm) from the back and sides of the grill or side burner.
www.weber.com®