Gas | Instructions |
| |
Reinstall control panel |
|
| |
Parts required: control panel, screws, and burner control |
| ||
knobs. |
|
| |
Place the control panel back onto the control panel |
| (1) | |
brackets on either side of the front of the cooking box. | |||
| |||
Line up screws with screw holes on both the control panel |
| ||
and control panel brackets. Tighten screws. |
| (2) | |
Reinstall burner control knobs & igniter wires(if necessary). |
| ||
Place corresponding control knobs down through the |
|
| |
bezels onto the valve stems. From the underside of the |
| ||
control panel, replace the two wires(1,2) of each igniter. |
| ||
- | + | - | + |
|
|
- | + | - | + |
|
|
| a |
| a | c | d |
| b |
|
| b | |
|
|
|
|
|
a = Yellow Tab with Black Wire |
| a = Yellow Tab with Black Wire |
b = White Tab with Black Wire |
| b = White Tab with Black Wire |
|
| c = Green Tab with Black Wire |
| ||
|
| d = Grounding Wire |
|
|
|