Weber 2000 LX owner manual Assembly, Step, Check package contents

Assembly	Step 1
Tools needed	Check package contents

Regular screwdriver

	Cooking box
Phillips screwdriver	(assembly)
Hammer

7/16 inch or an adjustable wrench
	Lid
Pliers	(assembly)

® ®

Block of wood

Supplies needed

Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank.")

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071to receive immediate assistance. Have your owner’s manual and serial number of the barbecue available for reference.

LP tank

LP tank filler adapter

Bottom tray

Two work tables

Two accessory trays

Swing table

7