Acer Comprehensive Guide to Disassembling S5201 Projectors

Chapter 3 System Disassembling and Replacement

Main Unit Disassembling

Tool : Screw Driver --Hex (#4-40) and Cross(Mechanical : M3,M4, Opt.Engine :M2)

Process :

Step	Description			Tool
			4	3
	(1) Disassemble the		1
	screw*5(M3*L8) in the lowercase
1	and screw*2 (M2.5*L10) in the			screw
	inlet and outlet case.			driver
	(2) Take off the lamp-door.	2		5

(1) Disassemble the screw*3		2	3
	1
(M3*L6) connecting the U/C with
the machine(you may need to
disclose the film on the upper							screw
2 case).
							driver
(2) Hit the inlet-case to loose the
hook and at the same time lift the
upper case.
			Hook in U/C
					at the same
					time lift the
		Hit the inlet case to
					upper case
		loose the hook
	Figure1			Figure2		Figure3

IR 3pin Wire

	(1) Untie the tie in the engine and
	loose the wire in it.(Figure1)
	(2) Disassemble the screw*1
	(M3*L8) connecting the F/C with	Figure4
3	the L/C.(Figure2)
	(3) Extract the I/R 3pin wire in the
	main board and take off the front
	case. (Figure 3,4)
	Attention :DON'T TOUCH OR
	BREAK THE LENS.
		Notice: Please release
		the IR wire before take
		off the Front Case.

41