Acer S5201B, S5301WB service manual Lamp box, and disassemble Screw*1M3*L6 connecting

	(1) Dismantle the screws *2		Figure1				Figure2
	(M3*L6) to loose the two
			S5201/5201B		S5301WB
	wires.(Figure1)
7
	(2) Dismantle the Grounding
	screw (M4*L6) in the shield and
	loose the Grounding wire.
	(Figure2)
				Figure1	1
	(1) Dismantle the screws*4	4
	(M3*L8) connecting the PB shield	2			3
	and the L/C, then take off the
	shield. (Figure1)							screw
8
			Figure2					driver
	(2) Take off the inlet case
	following the way indicated		At first, push here. (Take apart			Along arrow, pull inlet
			inlet case)
	below.(Figure2), then extract all					case and can take
						apart inlet case.
	the wires in the power board.

Figure3

9	(3) Take off the power board.
				Note: Circuit boards > 10cm2 has been highlighted with the yellow
				rectangle as above image shows. Please detach the Circuit boards
				and follow local regulations for disposal.
	(1) Extract the white lamp wire in					Figure 2
		Figure 1
	the lamp box, and disassemble
	the screw*1(M3*L6) connecting					2
	the lamp module in the machine,		screw		lamp wire
	then take off the lamp module.
							screw
10	(Figure1)					1
							driver

(2)Dismantle the screw*2(M3*L6) of the BKT in the neck of the engine and take off the BKT.(Figure2)

43