Acer S5201, S5201B, S5301WB

(Only for S5201) 2. SW source Detection：Please see Appendix E Item 9

22.0 Alarm sound

(Only for S5201B/ S5301WB)

22.1 Power on Beep sound Frequency follows Acer SW spec 1.19. Only one volume

22.2 Timer Frequency follows Acer SW spec 1.19. Three kinds of

volume setting

3D Projection :

 This fun ction is only for 3D contents and must wear 3D glasses.

TI DDP DDP2430 TI DDP DDP2431

• Does not support FRC (Frame Rate

Conversion)

• Can not support HQFS 60Hz 3D source

from DVD which need to go thru FRC

• Can only support 120Hz 3D source from

PC (VGA/DVI/HDMI)

• Support FRC (Frame Rate

Conversion)

• Can support HQFS 60Hz 3D source

from DVD which need to go thru FRC

• Can support 120Hz 3D source from

 OSD :

− Add “3D”, “3D Sync L/R” in Image Page

− 3D : NVIDIA 3D, DLP 3D, off. Default is Off. All of acer 3D models are support both

NVIDIA and DLP. (V1.17 08/21 update)

− “3D Sync L/R” is adjustable when above "3D" is on. Otherwise gray out. When you

discover the inversion of the image depth (for your Left/Right eyes), do the invert

action to solve this condition. (V1.17 08/21 update)

 W hen choose NVIDIA 3D , 3D Sync L/R is still gray out. (V1.18 09/30 update).

 3D Sync L/R only ena ble for DLP 3D, otherwise it will be gray out (V1.18 09/30

update).

 W hen 3D is enabled, Display Mode and Color temperature (in Color Page) is not

adjustable.

− Function disable :

 W hen 3D is enabled, eView Management and all empowering function (eTimer,

eOpening, ePower) are gray out.  eKey is disable (V1.18 09/30 update)

 W hen meeting 60/120Hz (no matter 3D on or off, HSG only one set value), if

enduser adjust adjustable items (ex. brightness), the value will not been stored

and only for that use only.

− For DDP2430 models : 3D / 3D Sync L/R (V1.17 08/21 update) , only appear for

VGA/DVI/HDMI source. Disappear if other sources.

− For DDP2230/2431 models : no this limitation.