![](/images/new-backgrounds/1250736/25073657x1.webp)
Hose Heat Shield
Burner Venturi
Side
Burner
Valve
Valve
Nozzle
Side
Burner
Control
Knob
Bezel
Step 16
Attach the hose heat shield to the right side of the cart frame using two 9# X 1/2”
Step 17
Remove two M4 bolts and spring washers from the side burner valve. Insert the side burner valve assembly through the hole in the side burner table base, then firmly seat the valve nozzle into the burner venturi.
WARNING! Never use your grill without leak testing all gas connections and hoses. See the section on "Leak Testing" in this manual for proper procedures .
Step 18
Place the bezel over the control knob mounting stem and position over holes in side burner base and side burner valve assembly. Attach with two M4 X 10mm bolts with spring washers which come with valve. Then install the side burner control knob onto valve stem.
28