Brinkmann 6430 owner manual Place warming rack in slots above cooking grills

Page 31

Grease Tray

Grease Cup

Warming Rack

Cooking Grills

Heat Distribution

Plates

Brackets

Igniter Cap Battery

Step 22

Slide grease cup into grease cup bracket located under grease tray.

Step 23

Place the heat distribution plates on lower level of grill body assembly directly above burners.

Step 24

Place cooking grills on support ribs directly above heat distribution plates.

Step 25

Place warming rack in slots above cooking grills.

Step 26

Remove igniter cap and insert battery with positive end of battery toward igniter cap. Ensure spring is in place inside igniter cap. Replace igniter cap and make sure the igniter is working properly.

30

Image 31

Contents Heavy Duty Outdoor Grill Important Safety Table of Contents General Warnings LP GAS Cylinder not Supplied with this Grill Installation InformationCylinder Specifications Hose and Regulator Installing the LP GAS Cylinder Onto the GrillRegulator Resetting Procedure Filling the LP GAS CylinderConnecting Hose and Regulator Connecting Hose and Regulator to AN LP GAS CylinderWhen to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Match Lighting the Side Burner Lighting the Side BurnerTurning OFF the Grill Controlling FLARE-UPS Operating the GrillBreaking in Your Grill Preheating the GrillSide Burner Rotisserie CookingGrilling to Proper Temperature CleanlinessHelpful Hints Burner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceBefore Storing Your Grill Cooking GrillsHeat Distribution Plates Transporting and StorageTrouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Step Step Spring Pin X 1/2 bolt Step Place side burner grate over side burner Place warming rack in slots above cooking grills ProSeries 810-6430-W Assembled Page Accessories Gallon PAN & Basket SET Warranty