Choose a good, cleared assembly area and get a friend to help you put your grill together. Lay cardboard down to protect grill finish and assembly area.
CAUTION! Some parts may contain sharp edges. Wear protective gloves if necessary.
Step 1
Attach cart base to side panels. Insert four M6 X 12mm bolts (silver) and star washers (silver) through cart base and into legs and tighten securely. Be sure the door hinges face forward.
Step 2
Attach loop strap bracket onto cart base by using two M6 X 12mm bolts (silver).
Step 3
Attach back panel to legs using
four M6 X 12mm bolts (silver) and star washers (silver).
Note: With the help of a friend, turn the cart assembly over. Try to minimize the stress to the legs.
Step 4
Attach locking casters to the bottom of the legs. Tighten caster bolts securely using hex nut wrench provided in parts pack.
23
Door Hinge Pin Holes |
Locking Caster
Hex Nut Wrench