Step 11
Attach the hood stops and the hinge brackets to the back of the lower grill housing using eight 6x12mm screws. Do not fully tighten the hinge brackets to the housing at this time.
Step 12
Assemble the handle to the hood. Insert two 5x65mm bolts through the wooden handle. Slide a flat washer over each bolt then the metal handle spacers. Insert the assembly into the holes on the front side of the grill hood housing. Secure using two split washers and two 5x4mm nuts.
Step 13
Place the Grill hood housing on top of the lower grill housing with the temperature gage and handle oriented to the front side of the grill. Using four 6x12mm screws attach the hood to the hinge brackets. Fully tighten all eight screws used to secure the hinge brackets to the lower grill housing and the grill hood housing.
21