Brinkmann Series 4415 owner manual Attach back cart panel by using four M6 X 50mm bolts

Page 25

Grease Cup Bracket

Note: With the help of a friend, turn the cart to its upright position.

Step 4

Attach back cart panel by using four M6 X 50mm bolts.

Note: Leave bolts hand tight until Step 9.

Step 5

Install door bracket using the four M6 X 50mm bolts. Make sure door stop is set toward front of cart.

Note: Leave bolts hand tight until Step 9.

Step 6

Attach the grease cup bracket onto the back cart panel by inserting the three tabs into the slots on the back cart panel.

24

Image 25

Contents Gas Outdoor Grill Important Safety Table of Contents General Warnings LP GAS Cylinder not Supplied with this Grill Installation InformationCylinder Specifications Regulator Resetting Procedure Installing the LP GAS Cylinder Onto the GrillFilling the LP GAS Cylinder Hose and RegulatorConnecting Hose and Regulator Connecting Hose and Regulator to AN LP GAS CylinderWhen to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Match Lighting the Side Burner Lighting the Side BurnerTurning OFF the Grill Breaking in Your Grill Operating the GrillPreheating the Grill Controlling FLARE-UPSSide Burner Rotisserie CookingGrilling to Proper Temperature CleanlinessHelpful Hints Burner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceHeat Distribution Plates Cooking GrillsBefore Storing Your Grill Trouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Attach back cart panel by using four M6 X 50mm bolts Slide the grease cup into grease cup holder M4 X 10mm round head bolts and two M4 washers Burner Venturi Side Burner Grate Place warming rack in slots above cooking grills ProSeries 4415TM Assembled Warranty