Step 7
Slide the grease cup into grease cup holder.
Step 8
Insert right side door pivot into the hole in bottom cart shelf. Then align door with cart frame, depress spring pin located on top edge of door and slide door toward side cart panel until spring pin locks into hole in door bracket. Repeat for other door.
Note: When performing Step 9, lift grill body from front and rear panels to avoid injury to hands and fingers.
Step 9
With the help of a friend, place grill body assembly on grill cart. Grill body will rest between upper side sections of cart. Align bolt holes located on the outside of the grill body assembly. Secure using four M6 X 15mm bolts. At this point, fully tighten four bolts holding back panel from Step 4 and the four bolts holding door bracket from Step 5.
25
Grease Cup
Spring Pin
Door Pivot