Names of Parts

INDOOR UNIT

Air Intakes

Air Outlet!

(4 locations)

Remote Controller

Refrigerant Tubes

OUTDOOR UNIT

Drain Hose

Air Outlet

NOTE

This illustration is based on the external view of a standard model. Consequently, the shape may differ from that of the air conditioner which you have selected.

This air conditioner consists of an indoor unit and an outdoor unit. You can control the air conditioner with the remote controller.

Air Intake	Air from the room is drawn into this section and
	passes through air filters which remove dust.

Air Outlet	Conditioned air is blown out of the air
	conditioner through the air outlet.

Remote	The remote controller controls power ON/OFF,
Controller	operation mode selection, temperature, fan
	speed, timer setting, and air sweeping.

Refrigerant	The indoor and outdoor units are connected by
Tubes	copper tubes through which refrigerant gas
	flows.

Drain Hose	Moisture in the room condenses and drains off
	through this hose.

Outdoor	The outdoor unit contains the compressor, fan
(Condensing)	motor, heat exchanger coil, and other electrical
Unit	components.
Unit

UNIT DISPLAY AND OPERATION BUTTON

INDOOR UNIT

OPERATION button

OPERATION lamp

TIMER lamp

HIGH POWER lamp

REMOTE CONTROL receiver

IMPORTANT

Avoid using radio equipment such as mobile phone near (within 4 ft. (1.2 m)) the remote control receiver. Some radio equipment may cause malfunction of the unit.

If the trouble happens, disconnect power and restart the air conditioner after a few minutes.

REMOTE	This section picks up infrared signals from the
CONTROL	remote controller (transmitter).
receiver

OPERATION	When the remote controller cannot be used,
button	pressing this button enables cooling operation.
	Each time this button is pressed, the operation
	mode changes cyclically.
	Cooling operation	Stop


OPERATION	This lamp lights when the system is in the
lamp	continuous DRY (orange), COOL (green) and
	FAN (green) mode.

TIMER lamp	This lamp lights when the system is being
	controlled by the timer.

HIGH POWER	This lamp lights during operation in the HIGH
lamp	POWER mode.

NOTE

The unit’s display lamps are dimmed during operation in the NIGHT SETBACK mode.

R410A specifications

Panasonic R410A is a refrigerant that has gained significant popularity in the air conditioning and refrigeration industry due to its favorable environmental properties and performance characteristics. Specifically designed to replace the harmful R22 refrigerant, which is being phased out due to its ozone-depleting potential, R410A offers a more eco-friendly alternative without compromising on efficiency or power.

One of the main features of R410A is its high energy efficiency. It operates at a higher pressure than R22, resulting in better heat transfer capabilities. This increased efficiency translates to lower energy consumption, making units using R410A more cost-effective in the long run. Additionally, R410A is known for its ability to provide excellent cooling performance even in high-temperature environments, making it suitable for a variety of applications, from residential air conditioning systems to commercial refrigeration units.

In terms of composition, R410A is a blend of two hydrofluorocarbons (HFCs), namely R32 and R125. This combination not only minimizes ozone depletion potential (ODP) but also reduces global warming potential (GWP) compared to older refrigerants. Panasonic has emphasized the importance of innovative technologies in its products, and R410A aligns perfectly with the company's commitment to developing sustainable solutions.

Panasonic also integrates advanced technologies to optimize the performance of R410A systems. For example, variable speed compressors, known as inverter technology, enhance system efficiency by adjusting the compressor's speed according to the cooling demand. This ensures that energy is only consumed when needed, further reducing operational costs.

Furthermore, R410A has a wide range of applications, including air conditioning systems, heat pumps, and chillers. Its versatility makes it a popular choice among manufacturers and consumers alike. The refrigerant is also compatible with existing R22 equipment, although specific retrofit procedures must be followed to ensure peak performance and reliability.

In conclusion, Panasonic R410A stands out as an innovative refrigerant choice in the HVAC industry, offering a combination of energy efficiency, environmentally friendly properties, and advanced technologies. As regulatory frameworks continue to tighten on greenhouse gas emissions, R410A and similar refrigerants are expected to play a crucial role in shaping a more sustainable future for air conditioning and refrigeration. Its high performance and lower environmental impact solidify its position as a leading refrigerant in contemporary cooling solutions.